Crane tracks and overpasses

Manufacture of crane rails for overhead cranes and overhead cranes 

Crane way - these are guides along which an overhead crane or beam crane moves. A rail is used as guides, and sometimes a one-piece cast square for light cranes.

An elevated crane runway is a crane runway installed at a certain height on columns or consoles. According to the principle of installation, there can be free-standing self-supporting - flyovers and fixed to existing buildings and structures. Distinguish the crane way on the supporting and suspension.

Below we will consider some options for the structural solution of elevated crane tracks for overhead and overhead cranes.

Stand-alone supporting crane runway on columns - Overpass

• For moving light loads in the working area;
• Easy installation in existing premises, forming a zone of the production site;
• Load capacity up to 5 tons;
• Crane stroke length up to 16 meters;
• Crane span up to 16.5 meters.

Peculiarity:

• Bolted connections allow easy mounting;
• The number of columns is four;
• Installation of the structure in 1 day;
• Without the use of welding;
• Design mobility;
• Fixing columns to reinforced concrete.

Reinforced at the base of the supporting crane runway on columns freestanding - Trestle

• Design mobility;
• Convenience of lengthening the structure, as production develops;
• Carrying capacity up to 16 tons;
• Crane travel length: unlimited;
• Span width: up to 30 meters;

Peculiarity:

• Mobility;
• Unlimited length;
• Fixing columns with reinforced concrete surface.

Reinforced from above supporting crane track on columns freestanding - Trestle

• The use of this type of structure is possible in rooms with no restrictions on the height of the ceiling;
• Load capacity up to 10 tons;
• Crane travel length: unlimited;
• Span up to 30 meters.

Peculiarity:

• Simultaneous installation of several cranes;
• The length of paths is unlimited;
• Easy to install.

Support crane way on columns fixed indoors - Overpass

• Savings on strengthening the supporting structure;
• Load capacity up to 10 tons;
• Mobility.

Peculiarity:

• The stroke length of the crane depends on the length of the existing structure;
• Anchoring columns to reinforced concrete.

Suspended crane track on columns freestanding

• For the operation of light cranes;
• Easy to install indoors;
• Load capacity up to 5 tons;
• Crane stroke length: unlimited;
• Span width: up to 16 meters.

Peculiarity:

• Bolted connections during assembly;
• No welding during installation;
• Design mobility

Suspended crane track on columns freestanding

• For the operation of light cranes;
• Easy to install indoors;
• Load capacity up to 5 tons;
• Crane stroke length: unlimited;
• Span width: up to 16 meters.

Peculiarity:

• Bolted connections during assembly;
• No welding during installation;
• Design mobility

How to buy a crane track | overpass for a crane?

If your enterprise needs a crane runway for lifting mechanisms, you need to transfer the main technical parameters of the design you require to our specialists. You can provide information by leaving a request on our website, send an e-mail or call the company's office. After receiving all the specifications, the technical department will calculate the cost and provide you with all the information.

Some basic parameters are required for ordering:

• load capacity;
• Construction height;
• span;
• Length;
• Delivery region;
• Is installation required?