"Gutman Crane" Company
logo

+38 (050) 381-52-70

info@gutman.com.ua

Short production timeHigh quality standards

Electric support hoists with a lifting capacity of 1.0 to 20.0 tons with a lifting height of up to 47 meters.

The hoists are used as part of double-girder support or overhead cranes. The hoist is suitable for upgrading old bridge cranes of the Soviet period. There are several modifications that differ in the design of the body, the number of lifting mechanisms, one or two.



 
 

 

The standard inter-rail distance is 1000.0 mm, upon request it is possible to increase the distance in increments of 50.0 mm. Possible choice: with a wired remote control or radio remote control; various lifting and moving speeds, including several speeds; the multiplicity of the block and tackle 1/1; 2/2; 2/1; 4/2; 4/1, etc.

 Technical documentation

Support hoists with 2/1 block and tackle, with a lifting height of up to 47 meters.  

 Load capacity, tons
Lifting height, m1,62,02,53,24,05,06,38,010,012,516,020,0
63333/53/53/53/55553 
7         3  
7,5      333   
8         555
933333/53/53555  
9,5   5  5   3 
11         3/555
1233333333/53/55  
12,5    555     
13   5      3 
14,5         555
15      5553/5  
15,5    55      
16,5      333   
17,5         555
18    3/533555  
18,5  33      3 
1933          
20         555
21         3  
22,5      333   
23,5         53/55
24    333     
25  33        
2633          
26,5         3  
28          3 
29      333   
30    333     
31,5  33        
32         3  
33          3 
34,5      333   
36,5    333     
37,5         3  
38,5          3 
40,5      333   
44         3  
47      333   
 
Note: the numbers in the table indicate the type of pulley block: "3" - 2/1 pulley block; "5" - 4/1 pulley block, respectively.