System benefits:

• Sold with eyebolt suspension
• More than 150 standard executions - 1 or 2 lifting speeds
• Capacities from 125 up to 4000 kgs.
• FEM (ISO) : 2M(M5)
• Standard hook runs 3 mts. (different lengths on request)
• High-strength steel rod chain 80kg/mm²
• Noise level less than 85 dB (A)
• Epicyclic crown wheel reduction gear and self-braking electrical motor with conical brake that ensures efficient braking action.
• Motor protection IP55, insulation class “F”
• Supply voltage : 400V- 3 phase - 50 Hz.
• Low voltage controls 48V
• Single chain fall (up to 2000 kgs.) with clutch device, dual chain falls (up to 4000 kgs.) with electromechanical overload device and raise/lower limit switches

System benefits:

• Horizontal movement by push/pulling the load
• Recommended for light duty and short load travel only
• The push trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars and equiped with shock absorbing buffers.
• Capacities from 125 up to 4000 kgs.
• FEM (ISO) : 2M(M5)
• Working at one or two lifting speeds
• Other characteristics as per DMK in fixed execution

System benefits:

• Movement operated by the push button panel fitted on the hoist
• Recommended when manual load pushing is not feasible and for heavy duty use.
• The electric trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars to prevent drop or derailing, and equipped with shock absorbing buffers.

• The trolley can be supplied at:
  • 1 speed - m/min. 11 or 22
  • 2 speeds - m/min. 7/22

 Electric limit switches to limit the horizontal travel of the electric trolley on the beam

• Suitable for rectilinear monorails; with special devices it can runs on curves (minimum internal radius on the technical catalogue)
• Capacities from 125 up to 4000 kgs.
• FEM (ISO) : 2M (M5)
• Other characteristics as per DMK in fixed execution

System benefits:

• The best solution to get the maximum hook-run; fitted on a frame with a return system for the chain, the frame is mounted on 2 trolleys.
• Available in electric or hand-push execution
• Capacities from 125 up to 4000 kgs.
• FEM (ISO) : 2M(M5)
• Lifting and travelling at 1 or 2 speed
• Other characteristics as per DMK in fixed execution